OpenDX - Documentation
Full Contents QuickStart Guide User's Guide User's Reference
Previous Page Next Page Table of Contents Partial Table of Contents Index Search

Image

Category

Rendering

Function

Renders an object and displays it as an image.

Syntax

This module is accessible only through the user interface.

Inputs
Name Type Default Description
object object none object to be rendered and displayed
renderMode flag 0 software=0, hardware=1
defaultCamera camera no default the reset camera
resetCamera camera no default reset the camera
bkgndColor vector or string "black" image background color
throttle scalar 0 minimum time between image frames (in seconds)
recordEnable flag 0 enable frame recording
recordFile string "image" file name for frame recording
recordFormat string "rgb" file format for frame recording
recordRes integer no default Image resolution for recording
recordAspect scalar no default Image aspect ratio for recording
axesEnabled flag 0 produce axes
axesLabels string list no labels labels for axes
axesTicks integer or integer list 15 number of major tick marks (0 to suppress)
axesCorners vector list or object input object bounds of axes
axesFrame flag 0 flag for axes frame type
axesAdjust flag 1 whether to adjust the end points to match tick marks
axesCursor vector no cursor cursor position
axesGrid flag 0 show grid lines on background
axesColors vector list or string list appropriate color(s) color(s) for annotation
axesAnnotate string list "all" annotation objects to be colored
axesLabelScale scalar 1.0 scale factor for labels
axesFont string "standard" font for labels
intrctnMode string "none" sets interaction mode of window
title string "Image" Image title
axesXTickLocs scalar list no default locations for x-axis ticks
axesYTickLocs scalar list no default locations for y-axis ticks
axesZTickLocs scalar list no default locations for z-axis ticks
axesXTickLabels string list no default labels for x-axis ticks
axesYTickLabels string list no default labels for y-axis ticks
axesZTickLabels string list no default labels for z-axis ticks

Outputs
Name Type Description
renderable object object, ready for rendering
camera camera camera used
where window window identifier for the Image window

Functional Details

This module functions much like a combination of AutoCamera and Display. However, it activates the Data Explorer direct-interaction features of the Image window, which are unavailable when you use the combination of AutoCamera and Display. These features include resizing of the image, pan/zoom, 3-D cursors, mouse-driven rotation, navigation in the image, mouse control of the look-to and look-from points, and direct user control of Image-window size. The View Control... dialog box (accessed from the Options pull-down menu in the Image window) permits explicit specification of these features.

Note: Since Image both renders and displays its input, you would not normally pass it an already existing image (because it would be interpreted as a large number of quadrilaterals). If you do have an image (e.g., previously imported or rendered by one of the appropriate modules), you should use the Display tool, without specifying a camera.

While the Image tool is only available while using the User Interface, you can implement your own interactions with an image using SuperviseWindow, SuperviseState, and Display. Thus direct interaction can be implemented from a stand-alone program using DXCallModule (see 13.10 , "Module Access" in IBM Visualization Data Explorer Programmer's Reference), from a program interacting with Data Explorer using DXLink (see Chapter 17. "DXLink Developer's Toolkit" in IBM Visualization Data Explorer Programmer's Reference), or even from a script (see Chapter 10. "Data Explorer Scripting Language" in IBM Visualization Data Explorer User's Guide). See SuperviseWindow for a discussion of these tools.

If it is installed, hardware graphics acceleration is available as one of the Rendering Options... in the Options pull-down menu of the Image window.

Usually you will use only the first parameter, object. The other parameters, which are hidden by default, control aspects of the image which can also be modified by various pulldowns in the menu of the Image window.

To open the Configuration dialog box for Image, you select the Image tool and use the Edit menu Configuration option.

object

specifies the object to be rendered.

renderMode

specifies whether the rendering should be software (renderMode=0) or hardware (renderMode=1).

defaultCamera

is the camera to be used when the Reset button in the View Control dialog box or the resetCamera parameter (see below) is set to 1 (one).

resetCamera

(when set to 1) resets the camera to

  • defaultCamera if that parameter is provided, or
  • the standard "front view" if defaultCamera is not provided.

bkgndColor

specifies the color of the image background as either an RGB color or a color-name string.

throttle

specifies a minimum interval between successive image displays. The default is 0 (no delay).

recordEnable

specifies that the created images are to be saved to a file.

recordFile

is the name of the file to which images are saved.

recordFormat

specifies the format in which the images are to be written. See WriteImage for more information.

recordRes

specifies the horizontal resolution (in pixels) of the recorded image.

recordAspect

specifies the aspect ratio (i.e., the ratio of vertical to horizontal size) of the recorded image.

axesEnabled

specifies that a set of axes is to be drawn around object.

axesLabels...axesFo nt

are (except for "axes" in the name) the same as the corresponding parameters described for AutoAxes.

intrctnMode

specifies one of the following as the interaction mode of the Image window:

"camera"       "none"        "roam"
"cursors"      "panzoom"     "rotate"
"navigate"     "pick"        "zoom"

title

is the title of the Image window.

axesXTickLocs

specifies the list of x-axis tick locations (see AutoAxes)

axesYTickLocs

specifies the list of y-axis tick locations (see AutoAxes)

axesZTickLocs

specifies the list of z-axis tick locations (see AutoAxes)

axesXTickLabels

specifies the list of x-axis tick labels (see AutoAxes)

axesYTickLabels

specifies the list of y-axis tick labels (see AutoAxes)

axesZTickLabels

specifies the list of z-axis tick labels (see AutoAxes)

The first output of the Image tool (renderable) is the object just before rendering (including, for example, any axes attached).

The second output (camera) is the camera used to render object (including, for example, any zooms or rotations applied by direct interactors).

The third output where is the window identifier for the Image window. This can be used, for example, by ReadImageWindow to read back the pixels from the image.

Recording images displayed in the Image window
  1. select Save Image... or Print Image... in the File pull-down menu, or
  2. use the record... parameters (see above).

Caching of Objects Internally in the Image Tool

The Image tool is implemented as a macro comprising a number of modules. You can control the caching of intermediate results between these modules using the special "Internal Caching" option in the module's configuration dialog box (see IBM Visualization Data Explorer User's Guide, "Using Data Explorer Effectively".

How the Image Window Centers on an Object

The first time the Image tool executes after being placed on the canvas, it "centers" itself on object. From then on, it maintains that viewpoint unless the user explicitly changes it (e.g., by using rotate, zoom, roam, etc.). Thus, if the object is moving in space, you may at times see only part of it or even none of it. You can "reset" the camera at any time with ResetCamera in the View Control... dialog box or by using the Image parameter resetCamera.

Getting the Output Image

If you want to extract the rendered image so that, for example, you can filter it or arrange it with other images (see Filter), then simply pass the first and second outputs of Image to the first and second inputs of Render. Alternatively, pass the where output to the ReadImageWindow module. Using the ReadImageWindow module allows you to capture the pixels from a hardware-rendered image. Note however, that for some platforms, if the image window is obscured (by another window for example) the obscured pixels may not be present in the captured image.

Tracking the Image window with another window

If you want to have two images visible, and want to alternatively control the viewpoint, resolution, etc. of one of the windows while having the second window display a different object from the same viewpoint, simply use the camera output of the Image tool as input to the camera input of a Display tool. The first input of Display should be the other object you wish to view. For an example, see WindVorticity.net.

For more information on using the Image tool in the user interface, see 6.1 , "Using the Image Window" in IBM Visualization Data Explorer User's Guide. Also see Display for information under the following headings:
 "Differences between Hardware and Software Rendering",
 "Rendering Approximations",
 "Using Default Color Maps",
 "Using Direct Color Maps",
 "Changing Rendering Properties",
 "Gamma Correction",
 "Image Caching",
 "Texture Mapping"

See also Color for information on "Coloring Objects for Volume Rendering".

Example Visual Programs

Nearly every example visual program uses the Image tool. ImageTool.net uses the hidden-by-default parameters. Image_wo_UI.net demonstrates a substitute Image macro using SuperviseWindow, SuperviseState, and Display, which can be used independent of the User Interface.

See Also

 Arrange,  AutoCamera,  Display,  Render,  AutoAxes,  SuperviseWindow,  SuperviseState


Full Contents QuickStart Guide User's Guide User's Reference

[ OpenDX Home at IBM | OpenDX.org ]